Wheeled Crane AMD 0001: NAICS/PSC Update

The US Army is seeking a wheeled crane that meets specific requirements. The crane must have a 3.8L CUMMINS engine, a conventional coolant cooling system, and at least a 4-cylinder engine. The performance requirements include at least 130 Hp @2500rpm and at least 360 Ft.Lb. @1600rpm. The crane must also have a Powershift 4-speed forward, 3-speed reverse transmission, a 4-wheel drive system, and ridged mounted axles with planetary hubs and limited slip differentials. Additional features required include a full LED lighting package, a diesel fuel system, a single load sensing axial piston pump, and a hydraulic reservoir with a visible fluid level sight glass. The operator's station must be a chassis mounted cab shell with roof safety glass, deluxe seat, A/C and Heat, and dash mounted mechanical lever proportional controls. The crane must also have a back-up camera, a 360-degree swing lock, and a back-up alarm. The outriggers must have front and rear oblique type beams at all 4-corners with nylon wear pads and hydraulic holding valves with independent control valves. Key features of the required wheeled crane include: • 3.8L CUMMINS engine • Conventional coolant cooling system • At least 4-cylinder engine • At least 130 Hp @2500rpm • At least 360 Ft.Lb. @1600rpm • Powershift 4-speed forward, 3-speed reverse transmission • 4-wheel drive system • Ridged mounted axles with planetary hubs and limited slip differentials • Full LED lighting package • Diesel fuel system • Single load sensing axial piston pump • Hydraulic reservoir with visible fluid level sight glass • Chassis mounted cab shell with roof safety glass, deluxe seat, A/C and Heat • Dash mounted mechanical lever proportional controls • Back-up camera • 360-degree swing lock • Back-up alarm • Front and rear oblique type beams at all 4-corners with nylon wear pads and hydraulic holding valves with independent control valves