HOSE ASSEMBLY

The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract with Lowest Price Technically Acceptable (LPTA) Evaluation Factors for the item listed below. The required item is for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice. The contract line items are for 6” HOSE ASSEMBLY, “LAYFLAT” WATER DISCHARGE HOSE, with specific requirements including size, material, and testing. • The hose assembly must be 6” I.D. nominal x 6-1/2” O.D. • The hose assembly must have a maximum weight of 2.50 LB per foot (without end fittings). • The hose assembly must have a working pressure of 200 LBS. • The hose assembly must have a temperature rating of -40 degrees (F) to 180 degrees (F). • The hose assembly must be abrasion, oxidation, and moisture resistant. • The hose assembly must be supplied in 50 foot length (+/- 12”). • The hose assembly must have an SBR/EPDM rubber inner tube. • The hose assembly must have a high tensile tire cord plies (minimum of four (4) for reinforcement). • The hose assembly must have an EPDM rubber outer cover. • Each hose assembly must have a male heavy camlock with a hose shank (equal or equivalent to PT coupling P/N 60EHD (ITEM NUMBER 1200560H)) on one end and a female heavy duty camlock with a hose shank (equal or equivalent to PT coupling P/N 60CHD (ITEM NUMBER 1200360H)) on the other end. Fittings must be red brass alloy C84400 or equivalent.