SOURCES SOUGHT for One (1) Advanjet HV-2000b Jet Valve

The DEVCOM Army Research Laboratory is seeking sources for one Advanjet HV-2000b Jet Valve with attachments. The valve should have a pneumatic power source, a maximum operating pressure of 90 pounds per square inch, and be able to extrude from a syringe, cartridge, or bulk feed. The dispensing rate range should be from one to 250 drops per second, and the nozzle should be heated to 70 degrees Celsius. The valve should also be able to dispense fluid with a viscosity range from 1 to 400,000 mPa.s. The following accessories are also required: two Advanjet Control Boxes, two feed tube kits, two diaphragm kits, and several nozzle kits. • Pneumatic power source • Maximum operating pressure of 90 pounds per square inch • Able to extrude from syringe, cartridge, or bulk feed • Dispensing rate range from one to 250 drops per second • Heated nozzle to 70 degrees Celsius • Able to dispense fluid with viscosity range from 1 to 400,000 mPa.s • Various accessories including control boxes, feed tube kits, diaphragm kits, and nozzle kits