Moog Valve

The Department of the Air Force is soliciting quotes for the purchase of three Moog Servo Direct Valves. The valves must meet specific technical requirements, including a flow rate of 14-16 gpm, maximum operating pressure of 3,000 psi, and a spool type of 4-wa, 3-Position. The valves must also be certified as intrinsically safe for use in hazardous locations. • The quantity required is three valves. • The valves must be Brand Name or Equal to Moog Servo Direct Valve (CFI 72049100) CFI – 773K746A. • The flow rate must be 14-16 gpm (53-61lpm) at 500 psi pressure drop. • The maximum operating pressure must be 3,000 psi (210 bar) or greater. • The spool type must be 4-wa, 3-Position. • The signal range must be +/- 20 mA. • The valve connector must be a 4-Pin MS style threaded connector (Mates with MS3106F14S-2S or equivalent). • The seal material must be FKM (Viton) compatible with petroleum-based hydraulic fluid. • The port circle must be .937 in. • The mounting pattern must be Moog Standard Size 4 or ISO 4401-04-04-0-94. • The 100% electrical step response must be 4 to 17ms. • The valve must have 2-stage flow control Mechanical Feedback (MFB) Servo Valve. • The valve must be certified as intrinsically safe for use in hazardous locations (e.g., FM Approved for Class I, II, III, Division 1, Groups A, B, C, D or equivalent).