BOLT,MACHINE

The U.S. Navy is seeking a contractor to supply bolts, specifically machine bolts, that meet the requirements outlined in the document. The bolts must be manufactured in accordance with Leslie Controls Inc. drawing 21844N, piece 2, with some modifications. The contractor must provide one additional fastener for each uniquely identified heat/lot of material in each shipment, and complete traceability must be maintained on this extra fastener. The contractor must also provide quantitative chemical and mechanical analysis of the material, and test certifications are required for the specified tests on the items listed. The contractor must maintain a quality system in accordance with ISO-9001, and the calibration system requirements of ISO-10012 or ANSI-Z540.3 with ISO-17025. * Key requirements include: * Material: ASTM-A193, Grade B7 * Unit of Issue: EACH * Traceability: The contractor must maintain traceability from the material to the material certification test report and other required Objective Quality Evidence (OQE) * Testing: Certifications are required for Liquid Penetrant Inspection or Magnetic Particle Inspection (Wet Method) (Either inspection is acceptable) * Performance: The contractor must perform a wedge tensile test on a Full Size Fastener for each production lot and report it as part of the Mechanical Properties. * Quality System: The contractor must provide and maintain a quality system in accordance with ISO-9001, with the calibration system requirements of ISO-10012 or ANSI-Z540.3 with ISO-17025.