Purchase of Track Loader

Tarrant County is seeking bids to purchase a track loader to assist with road work at job sites. The track loader must meet specific technical specifications, including a U.S. EPA Tier IV Final Rating engine, a minimum of 200 horsepower, and a hydraulic demand fan. The bidder must also provide a warranty for the track loader and offer free training on how to use it upon delivery. The bid must include the price of the track loader, as well as any additional costs such as delivery fees. • The track loader must have a hinged radiator guard and swing out fan. • The track loader must have electro hydrostatic control transmission with travel speed of 0 to 6.2 miles per hour at a minimum. • The track loader must have a hydraulic reversing fan. • The track loader must have a load sensing variable implement pump. • The track loader must have an operating weight of 44,000 pounds at a minimum. • The track loader must have a length to front of track less than 204 inches. • The track loader must have a cab height at 130.9 inches at a maximum. • The track loader must have a width of 90.5 inches at a minimum. • The track loader must have a width for a general-purpose bucket of 101.0 inches at a minimum. • The track loader must have full bottom guards. • The track loader must have a heavy-duty undercarriage with seven track rollers with two carrier rollers per side. • The track loader must have oscillating track roller frames. • The track loader must have a track shoe with standard at 22-inch double grousers. • The track loader must have a track gauge at 72.8 inches at a minimum. • The track loader must have a track on the ground at 100 inches at a minimum. • The track loader must have joystick steering, propulsion, and implement controls. • The track loader must have operator programmable lift and tilt kickouts. • The track loader must have a machine pitch and roll indicator. • The track loader must have a bucket shake. • The track loader must have a z-bar loader linkage. • The track loader must have implement cylinders with sensors. • The track loader must have a multi-shank ripper. • The track loader must have a quick disconnect bucket. • The track loader must have a hydraulic 3 valve multipack joystick pack. • The track loader must have a ripper hitch. • The track loader must have a hydraulic operated clam shell bucket at 3.2 cubic yards at a minimum. • The cab must have a seat with adjustable armrests, seat belts, grab handle on dash, sliding window with tinted glass, AC and Heat, Bluetooth radio with AM and FM, windshield wipers for front and rear, LED flashing beacon, four halogen work lights, main disconnect power switch, two horns, rearview camera, full-color 10-inch at a minimum touchscreen display, sound suppression, twelve volts power outlet, and five volts USB port. • The track loader must have a back-up alarm. • The track loader must have one set of manual instructions either paper or electronic. • The track loader must have one set of new and in the original packaging filters.