USCGC James Steering Actuator Overhaul

The US Coast Guard is seeking a contractor to overhaul the rotary vane steering actuator assembly for the Starboard steering system on the USCGC James. The contractor will be required to provide the services of a technical representative to accomplish the work on site, and must ensure compliance with manufacturer's procedures and standards. The contractor will also be responsible for handling all interferences, rigging of tools and materials, and performing operational tests. The work will be performed at the FLETC Base Charleston, and the period of performance is from 05 JAN 26 to 15 JAN 26. • The contractor must provide the services of an OEM authorized/ licensed Tech Rep for the Kongsberg steering actuator. • The contractor must renew the following parts: Piston Seals, HP Seals and Backing Strips, LP Seals, Bearing Shells, O-rings, and Top and Bottom Actuator Seals. • The contractor must perform an initial operational test and a post-repair operational test to demonstrate the equipment is in satisfactory operating condition. • The contractor must ensure the rudder and rudder stool are aligned, and the actuator and helm are set at 0 degrees during final installation. • The contractor must collect and dispose of all drained fluids in accordance with federal, state, and local regulations.