PNEUMATIC WATER TABLE PLASMA CUTTER UNISON Buy #1209464

The US Army is seeking a pneumatic water table plasma cutter with specific salient characteristics. The system must have a 5’x10’ CNC pneumatic water table, an effective cutting width of 5 ft, and an effective cutting length of 10ft 6 in. It must also have a Controller Swing Arm, Dual Side Rack and Pinion Servo Motor Drive System (X,Y), Lead screw Z Axis, linear guide rails, and a Gantry Clearance of 9 inches minimum. The system must come with a Hypertherm Powermax 105 plasma torch or equivalent, customer site installation, and training. The delivery location is the Combined Support Maintenance Shop East, Bldg. 10-102, Ft. Indiantown Gap, Annville, Pennsylvania 17003. • Must be a 5’x10’ cnc pneumatic water table • Must have an effective cutting width of 5 ft • Must have an effective cutting length 10ft 6 in. • Must have a Controller Swing Arm • Must have Dual Side Rack and Pinion Servo Motor Drive System (X,Y) • Must have Lead screw Z Axis • Must have linear guide rails • Must have a Gantry Clearance: 9 inches minimum • Must have Positioning Accuracy: (+/-) .007 or better • Must have a Drain Valve • Must have a Removable slag tray • Must have a parts catcher tray • Must come with customer site installation and training