LMPS Stainless Steel Intake Strainers

Central Arkansas Water (CAW) is requesting bids for the LMPS Stainless Steel Intake Strainers Project. The project includes the fabrication and supply of six stainless steel intake strainers for installation in the existing intake structure. The scope of work includes providing all materials, labor, fabrication, welding, finishing, packaging, and delivery required to provide complete strainers ready for installation. Key considerations include the stainless steel grade, fabrication method, welding process, finish, and any assumptions or deviations from the attached drawing. • The vertical bars shall be 1/2-inch half-round stainless steel bars running the full length of each strainer. • The half-round bars shall be oriented with the flat side facing outward and the curved side facing inward toward the inside of the ring. • A 1/2-inch gap shall be maintained between bars for spacing. • The bars shall pass through three evenly spaced retainer rings as shown in Detail B of the attached drawing. • All bars shall be welded at each retainer ring, at the bottom ring, and at the top plate. • A lifting plate shall be welded to the center of the top plate as shown in the drawing detail. • All stainless-steel components shall be new, unused, and free from defects.