V. Delevan Sewer Project - Pump Station Design Support

Please review the following description of work for Pump Station Design Support. Anyone (regardless of company MWBE status) who would like to submit a price quote for the dollowing scope of work should contact our office (using the contact information below) to obtain a more detailed scope of work. Project: Village of Delevan V. Delevan Sewer Project CWSRF Project No. C9-6670-03-00 General Project Description: The Cattaraugus County Health Department has documented many failing septic systems in the Village of Delevan due to soils conditions and density of development. In order to provide the residents of Delevan reliable wastewater removal, the Village has elected to construct a sanitary sewer system within the Village limits (centered along NYS Rt. 16). The proposed project consists of the construction of a low pressure grinder pump sewage collection system to serve properties within the Village. The project is proposed to install approximately 360 grinder pump stations with HDPE service laterals to the low pressure sewer main, approximately 31,000 linear feet of HDPE low pressure sewer main with diameters ranging from 1.25 inches to 6 inches, an intermediate pump station, air/vac valve stations, valves, cleanout/flushing stations, line markers, tracer wires and locating stations. The proposed collection system will convey wastewater to a centralized intermediate pump station within the Village that will pump the wastewater into the existing Lime Lake Sewer District (LLSD) forcemain through a single interconnection. The wastewater will then be conveyed along NYS Rt. 16 by the LLSD forcemain to the Village of Arcade, NY municipal wastewater treatment plant on Hurdville Road. The Village of Delevan has received funding for the project from Environmental Facilities Corporation (EFC) through the New York State Water Grants Program and New York State Clean Water State Revolving Fund (CWSRF). General Scope of Work: 1) Intermediate Pump Station Design Support: The proposed intermediate pump station is anticipated to be a concrete wet well and a duplex above-ground prefabricated pump skid with an enclosure designed for a pumping rate of approximately 250gpm. The proposed station will require new utilities to be brought on-site including but not limited to electric, natural gas, and stand-by power. All utilities required will be available at the R.O.W. on NYS Rte. 16. a. Provide design and detailed design drawings for new utilities to be brought on-site and into the pump station enclosure. Provide design support of the pump station by sizing a stand-by power generator and preparing detailed design drawings. b. Attend design team meetings and coordinate with utility companies. c. Deliverables include an Engineer’s Report which summarizes the design, detailed design drawings, specifications and cost estimating for proposed on-site utilities designed as part of this scope of work. Deliverables should be prepared by a Licensed Professional Engineer in the State of New York. Progress submissions should be submitted to MDA at the 30%, 60%, 95% and 100% design phases for coordination purposes. 2) Pump Station Electrical Design Support: The proposed pump station may require additional electrical design support for SCADA and telemetry. a. Provide design and detailed design drawings for SCADA and telemetry. b. Deliverables include a summary of the design, detailed design drawings, specifications and cost estimating for proposed materials as part of this scope of work. Deliverables should be prepared by a Licensed Professional Engineer in the State of New York. Proposal Requirements: 1. Consultant shall include a Lump Sum Price for the scope of work outlined in Intermediate Pump Station Design Support above for the project site. 2. Consultant shall include an hourly estimate for the scope of work outlined in Pump Station Electrical Design Support above for the project site. Consultant’s schedule of rates shall also be included. All correspondence related to the project shall reference MDA Project No. 26200 and CWSRF Project No. C9-6670-03-00 – Village of Delevan – V. Delevan Sewer Project. If you have any questions regarding this project or the price quote submission process, feel free to contact Jonathan Rogers at our office by email or phone.Thank you for your prompt response, Jonathan Rogers, EITProject Engineer I Phone: 716-699-4650Email: [email protected] 26200 Service-Disabled Veteran-Owned Business (SDVOB) SDVOB Goal: 0.00% Minority / Women Business Enterprise contracting goals (MWBE) Total MWBE Goals: 20.00% Disadvantaged Business Enterprise contracting goals (DBE) DBE Goal: 0.00%