Description
The United States Coast Guard is seeking a contractor to provide overhaul services for a fire pump assembly. The pump unit is a centrifugal pump with a 500 GPM capacity at 125 PSI, and it is used on 270' WMEC vessels. The contractor will be responsible for inspecting, estimating, and overhauling the pump unit, including replacing worn or damaged parts, reconditioning the drive motor, and applying a primer and finish coat of paint. The contractor must also conduct a series of tests, including a rotational test, hydrostatic test, and performance test, to ensure that the pump unit meets the required specifications. The contractor must provide a written certification that the motor was reconditioned to the same standards as new, and a copy of the test report shall be packed with each pump unit.
* The pump unit must be a complete Crane Deming pump with motor.
* The contractor must notify the Coast Guard Contracting Officer of any missing components or questionable condition.
* The overhaul requirements described are considered minimum and are not intended to replace any procedures, controls, examinations, or tests normally employed by the contractor.
* The contractor must maintain a test equipment calibration program in compliance with ANSI/NCSL Z540.3.
* The contractor must provide a copy of the test or inspection report to the QAR upon arrival at the contractor's facility.
* The contractor must guarantee the item against defects that lead to failure for two years after delivery to the Coast Guard.