Description
The Bridgewater State University is seeking quotes from qualified contractors to perform roof repair and waterproofing improvements at the Flight Training Center. The project includes tasks such as removing and disposing of existing edge metal, securing the field membrane, replacing wood blocking, and furnishing and installing a new EPDM membrane. The project is expected to start on January 10, 2026, and end on January 30, 2026.
• Remove and dispose of approximately 220 linear feet of existing edge metal.
• Secure the field membrane using bars and metal plates.
• Replace approximately 100 linear feet of 2x6 wood blocking.
• Furnish and install a 3-foot-wide, 60-mil EPDM membrane around the perimeter.
• Mechanically fasten around existing roof penetrations.
• Re-flash existing penetrations with new EPDM flashing.
• Furnish and install EPDM patches over areas previously repaired with roof cement.
• Re-flash approximately 80 linear feet of the rising wall with new EPDM.
• Inspect the existing roof membrane, patch any holes as needed, and repair T-joints as necessary.