REMOTE INTERFACE UN

The United States Navy is seeking a contractor to repair and overhaul remote interface units. The contractor will be responsible for providing all necessary parts and materials, performing repairs and overhauls, and testing and inspecting the units to ensure they meet the required standards. The contract will require the contractor to maintain a quality system that ensures conformance to all applicable requirements of ISO 9001/SAE AS9100. The contractor will also be required to provide a proper enclosed warehouse environment for storing materials and assets. Some key points to note include: * The contractor must obtain final inspection and acceptance by the Government for all assets within the required turnaround time. * The contractor must provide a throughput constraint for each National Stock Number (NSN). * The contractor must maintain a configuration management plan in accordance with the provisions of NAVSUP WSS configuration management clause NAVICPIA18. * The contractor must ensure that all parts and materials used in the performance of the contract are in accordance with the latest approved revision of applicable drawings and specifications. * The contractor must establish and maintain a system of control over purchased parts and materials to ensure compliance with the requirements of the contract. * The following are some key terms and definitions: • Repair Turnaround Time (RTAT): The contractual delivery requirement measured from the date of asset return to the date of asset acceptance. • Overhaul: An overhauled part is one that has been disassembled, cleaned, inspected, repaired as necessary, reassembled, and tested in accordance with the approved repair/overhaul manual. • Beyond Economical Repair (BER): An item is BER if the cost of repair exceeds 75% of the production quantity price to replace the item. • Missing on Induction (MOI): A Weapons Repairable Assembly (WRA) is subject to this MOI provision if the item received by the contractor for repair is missing one or more Shop Replaceable Assemblies (SRAs). * The contractor must perform all repairs and overhauls at the facility identified in the contract. * The contractor must provide a calibration system that meets the requirements of ANSI/NCSL Z540.3, ISO-10012-1, or an equivalent calibration program acceptable to the Government.