BUSHING,MACHINE THR

The Naval Sea Systems Command (NAVSEA) is soliciting proposals for the procurement of bushing, machine thr. The material covered in this contract will be used in a crucial shipboard system, and the use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. The contractor must provide and maintain a quality system in accordance with ISO-9001, and the calibration system requirements of ISO-10012 or ANSI-Z540.3 with ISO-17025. Key requirements include: * Quantitative chemical and mechanical analysis of material traceable to traceability markings * Material certification test reports must include the class, form, condition, grade, type, finish, and/or composition of the material supplied * The contractor must develop written procedures that implement the material control requirements stated in the contract * The contractor must maintain adequate records of all inspections and tests, and the records must indicate the nature and number of observations made, the number and type of deficiencies found, the quantities approved and rejected, and the nature of corrective action taken as appropriate. * The contractor must provide a certificate of compliance certifying that the items/components furnished under this contract comply with the requirements of the procurement document, including any/all invoked specifications and drawings. Some of the key specifications and standards that apply to this procurement include: * FED-STD-H28 * ANSI/ASQ Z1.4 * ASTM-B139 * MIL-STD-792 * ISO 9001 * ISO 10012 * ANSI-Z540.3 * ISO-17025 * MIL-I-45208