CGC JUNIPER - Shaft Seal Replacement Tech

The United States Coast Guard is seeking a contractor to perform a shaft seal replacement on the CGC JUNIPER. The work includes inspecting, measuring, cleaning, and adjusting the mechanical shaft seals, as well as replacing the seal kit. The contractor will be required to provide a technical representative to advise on manufacturer's proprietary information and ensure compliance with manufacturer's procedures and standards. The work will be performed onboard the CGC JUNIPER in Honolulu, HI. • The contractor must submit a condition found report and a final report of the tech rep visit. • The contractor must handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5. • The contractor must furnish and install all protective measures in accordance with SFLC Std Spec 0000, paragraph 3.3.3. • The contractor must perform the inflatable seal pressure drop test and the water leakage test. • The contractor must prepare and coat all new and disturbed surfaces to match existing adjacent surfaces.