Kaches Automation First Fill

The Bureau of Reclamation is seeking a contractor to provide various electrical supplies and equipment for the Kaches Automation First Fill project. The project includes the installation of cables, conduit, and other electrical hardware. The contractor will be responsible for providing all necessary materials and labor to complete the project. The project is expected to be completed within 30 days after award. • Cable - 14 AWG, 4 conductor, outdoor cable, 500 ft spool • Cable - 22 AWG, 2 pair, 1000 ft spool • Pull tape - 1250 lb, 2000 ft • 210 lb, 6500 ft Poly Pull Line with bucket • 1.5 inch Foam Conduit Piston • Cable Pulling Lubricant, Water Based Gel - 1 Quart Squeeze Bottle • 1-1/2" PVC, Schedule 40, 10-ft lengths • 1-1/2" PVC 90° Elbow, Schedule 40, Gray • Coupling, 1-1/2" Diameter, PVC, Gray • Expansion Coupling, 1-1/2" PVC, 6" Length • Rectangular Pull Box, HDPE, 14"x19"x12", Light Duty • Heavy Duty Pull Box with Lid, 11"x18"x12", Tier 22 • H20 Rated Underground Enclosure, 16"x22"x12", Reinforced Concrete with Steel Frame • Rectangular Cover, Type: Flush, Size: 14 x 20", Steel Checker Plate, H20 Rated • 1/2"x2'x25' 19-gauge hardware cloth, galvanized • Liquid-Tight Flex Metal Conduit: 3/4 in Trade Size, Gray • Liquid-Tight Conduit fitting: Steel/Iron, 3/4 in Trade Size, noninsulated, 90 deg elbow • Liquid-Tight Conduit Fitting: Steel/Iron, 3/4 in Trade Size, Insulated, Straight • Liquid-Tight locknut, 10-pack • 3/4" One-hole strap, zinc-plated steel, 20-pack • #8x1" Hex washer self-drilling sheet metal screws, 100 pack • 1-1/2" clamp back, malleable iron • 1-1/2 in. Rigid 90-Degree Steel Conduit Elbow • 1-1/2 in. Rigid Conduit Coupling • 1/2"x8' Ground Rods • 12 gauge ground wire, 15 foot length • 1/2" Ground Clamp • 2" diameter sch 40 metal pole, 7 ft long • U-bolt for 2" conduit, 2.5" ID, zinc-plated, w/nuts • Quikrete, 50 lb bags, fast set • Fully-threaded concrete wedge anchors, 304 stainless, 1/4"x3-1/4", box of 100 • 12V 7Ah Sealed Lead Acid Battery (Flame Retardant) • 15 ft Reverse Polarity SMA Antenna Cable • 3/4" PVC Conduit, 10' Length, Schedule 40, Gray, Bell End • Coupling, 3/4" Diameter, PVC, Gray • 3/4" PVC 90° Elbow, Schedule 40, Gray • 3/4" PVC Male Terminal Adapter • 3/4" PVC Female Terminal Adapter • 3/4" Conduit Locknut • Sealing Locknut, 3/4", PVC Gasketed, Steel/Zinc • Expanding Foam Sealant - 12oz Aerosol Can • 3/4" Rigid Steel Conduit, 10' Length • 3/4" Threaded Impact Resistant Plastic Bushing • 12 AWG THHN/THWN-2 Stranded Copper, Gray, 500 ft • 12 AWG THHN/THWN-2 Stranded Copper, Green, 500 ft • 12 AWG THHN/THWN-2 Stranded Copper, Blue, 500ft • 20A GFCI Commercial Grade Decora Receptacle, 5-20R, Gray • 4" Square Box, Welded, 2-1/8" Depth, 1/2 and 3/4" Knockouts, Steel • 4" Square Exposed Work Cover, (1) Decorator/GFCI • Chase Nipple, 1/2", Zinc Die Cast • 1/2" Conduit Locknut • Shallow Strut, Elongated Holes, Steel, Pre-Galvanized, 1-5/8" x 13/16" x 10' • Wiring Duct, Narrow Slot, 2.25" W x 3" D x 6' L, PVC, Gray • PANDUCT Wiring Duct Cover, 2.25" W x 6' L, PVC, Gray • Junction Box, NEMA 12, Hinged Cover, 12" x 12" x 6" • Conduit Body, Type LB, "R" Series, 3/4", Die Cast Aluminum • Rigid Strut Strap, 3/4", Steel, Electro-Galvanized • Clamp Back, 1/2 - 1", Aluminum, For Use with Malleable or Aluminum Straps • 3/4 IN Pipe Strap, Malleable Iron, Electro Galvanized Finish, Use W • Breaker, 20A, 1P, 120/240V, 10 kAIC, Type CH • Breaker, 20A, 1P, 120/240V, 10 kAIC, Classified • Wedge Anchor, Full Thread, Stainless, 1/4 x 2-1/4" (Box of 50) • 3/4" Self Drilling Screw (Box of 100) • Fender Washer, 1/4 x 1-1/4", Steel (Box of 100) • 1/4" Steel Round Head Machine Screw, Slotted/Phillips, 100/Pack