Walk-In Site Structure Sole Source

The Oregon Department of Forestry (ODF) intends to enter into a sole source contract with Pioneer Energy Products, LLC (“Pepro”) for the purchase of two 8’ x 8’ walk-in RF shielded shelters. The shelters must meet specific requirements, including integrated Motorola R56 standards, a faraday cage to protect against RFI, lightning, and EMI, and a 52 ft articulated/folded tower meeting stringent TIA/EIA222G. The shelters will be used on federal land and private ski resort, and the need for self-grounding without ground penetrating ground rods is required per the landowner agreements. • The shelters must have a single DC input power for solar power solution • The shelters must have a rack mount bus bar • The shelters must have (8) solar brackets and strut channel welded to roof • The shelters must have a UV Resistant PEPRO Clay Powder Coat Exterior finish • The shelters must have (2) exterior lights, (4) interior lights, fire extinguisher, and first aid kit • The shelters must have provision to mount customer camera solution and cable • The shelters must have Pan & Tilt 400 solution for customer microwave dish on tower • The shelters must have (2) RF Shielded Cable Entry Gland and two cover plates • The shelters must have provision made for mounting up to (6) ODF 7’ racks • The shelters must have forced air solution / passive/active (fan) ventilation • The shelters must have (8) ufer ground pads, 133 steel plates, compression leg supports • The shelters must have long outriggers and four (8) corner jack stand supports • The shelters must have data entry module (filter)/telco box for fiber or equivalent into shelter