Description
The U.S. Navy is seeking a high frequency welder for the SRF-JRMC Yokosuka, Japan. The contractor shall provide one high frequency welder, installation, operational test, and operation/maintenance training for equipment. The equipment will be used for welding thermoplastic materials like PVC, EVA, and polyurethane by using high-frequency electromagnetic energy. The contractor must submit documentation that unambiguously demonstrates compliance with DFARS 252.225-7042.
* Key features of the high frequency welder include:
* Type: Three-dimensional forming
* Maximum High Frequency Output: 7 kW
* Oscillation Frequency: 40.46MHz 5%
* Control Method: Touch Panel
* High-Frequency Setup: Digital (Auto-tuning / One-touch button recall)
* Operation Safety Mechanism: Emergency Stop Button and Both One-hand and One-foot simultaneously Push Button Start
* Temperature Control: Digital (Variation: less than 3)
* Spark Protection: High sensitivity spark detection circuit
* Pressure Mechanism: Pneumatic
* Vertical Air Cylinder Press Pressure: Minimum 1,000 lbs.
* Electrode Heating Method: Hybrid (High Frequency and Heater Assistance)
* Electrode Cooling Method: Forced Air Cooling
* Upper Electrode Holder Shape: 24 1 inches long, Straight
* Lower Electrode Size: 24 0.5 inches 8 0.5 inches (W D) (90 degrees turn shape)
* Electrode Gap (Daylight): Minimum 7.5 inches
* Throat Depth (Service Space toward frame): Minimum 27 inches
* Table Height: 32 2 inches
* External Dimension: Maximum 24 inches 70 inches 77 inches (W D H)
* Weight: Maximum 1,200 lbs.
* Power cable: Length: 16 feet, Cable type: 4-core cabtire cable, Four (4) ring terminals for M10 terminals shall be installed to cable ends.