V. Delevan Sewer Project - Geotechnical Consultation

Please review the following description of work for Geotechnical Services. Anyone (regardless of company MWBE status) who would like to submit a price quote for the dollowing scope of work should contact our office (using the contact information below) to obtain a more detailed scope of work. Project: Village of Delevan V. Delevan Sewer Project CWSRF Project No. C9-6670-03-00 General Project Description: The Cattaraugus County Health Department has documented many failing septic systems in the Village of Delevan due to soils conditions and density of development. In order to provide the residents of Delevan reliable wastewater removal, the Village has elected to construct a sanitary sewer system within the Village limits (centered along NYS Rt. 16). The proposed project consists of the construction of a low pressure grinder pump sewage collection system to serve properties within the Village. The project is proposed to install approximately 360 grinder pump stations with HDPE service laterals to the low pressure sewer main, approximately 31,000 linear feet of HDPE low pressure sewer main with diameters ranging from 1.25 inches to 6 inches, an intermediate pump station, air/vac valve stations, valves, cleanout/flushing stations, line markers, tracer wires and locating stations. The proposed collection system will convey wastewater to a centralized intermediate pump station within the Village that will pump the wastewater into the existing Lime Lake Sewer District (LLSD) forcemain through a single interconnection. The wastewater will then be conveyed along NYS Rt. 16 by the LLSD forcemain to the Village of Arcade, NY municipal wastewater treatment plant on Hurdville Road. The Village of Delevan has received funding for the project from Environmental Facilities Corporation (EFC) through the New York State Water Grants Program and New York State Clean Water State Revolving Fund (CWSRF). General Scope of Work: 1. Borings every 1,000-2,500 feet along the proposed route for forcemain installation (depth of 10 feet) a. Reporting of boring logs including continuous sampling, blow count and groundwater level b. Report Boring location using existing features in the area, collect GPS coordinates, and mark for pick up by surveyor. 2. Provide a Geotechnical Report, prepared by a Licensed Professional Engineer in the State of New York Proposal Requirements: 1. Contractor shall provide a Lump Sum Price for Mobilization and Demobilization to and from the project site. 2. Contractor shall provide a Lump Sum Price for providing a Geotechnical Report, stamped by a Licensed Professional Engineer in the State of New York. 3. Contractor shall provide a Unit Price per each 10’ deep boring, with the estimate that anywhere from 12-31 borings will be required across the project area. All correspondence related to the project shall reference MDA Project No. 26200 and CWSRF Project No. C9-6670-03-00 – Village of Delevan – V. Delevan Sewer Project. If you have any questions regarding this project or the price quote submission process, feel free to contact Jonathan Rogers at our office by email or phone.Thank you for your prompt response, Jonathan Rogers, EITProject Engineer I Phone: 716-699-4650Email: [email protected] 26200 Service-Disabled Veteran-Owned Business (SDVOB) SDVOB Goal: 0.00% Minority / Women Business Enterprise contracting goals (MWBE) Total MWBE Goals: 20.00% Disadvantaged Business Enterprise contracting goals (DBE) DBE Goal: 0.00%